Press in ball joint - No chance without special press - MAPCO has the solution
Hi folks ... here's a tip for our T4 drivers.
If the upper ball joint is worn out and badly worn, a huge repair is needed.
MAPCO Autotechnik offers the upper handlebar arms complete with ball joint at an unbeatable price.
This is interesting for many customers, as they have the opportunity to remove the handlebar arm but can not press the ball joint.
You could also change the ball joint without removing the handlebar arm, but who buys such a sinfully expensive special press to do just this one job.
If you do not have a friendly workshop with a 20-ton press, you can now also buy the complete handlebar arm.
The second major advantage: at the same time, new handlebar sleeves have been installed and prevented, that a few weeks later, a renewed repair is necessary.
As always, I recommend doing this job with a friendly professional.
If there is a problem, call the free 0800 2060666 hotline. I like to answer all open questions.
Landing Gear Youtube Video
Product Info
Art. No
49203
Manufacturer
MAPCO Autotechnik GmbH
Manufacturer No:
MAPCO-49203
EAN
4043605062680
State:
brandnew
Criteria
Criterion
detail
Fitting Position
Rear Axle Left
Fitting Position
Upper
paired article number
49204
Control/Trailing Arm Type
Control Arm
Material
Sheet Steel
Required quantity
1
Manufacturer's number*
OE-Nr.
Manufacturer
52400-SM1-A01
HONDA
52400-SM1-A02
HONDA
52400-SM1-A03
HONDA
52400-SM1-A04
HONDA
52400-SM4-003
HONDA
52400-SM4-013
HONDA
52400-SM4-023
HONDA
52400-SM4-033
HONDA
52400-SM4-043
HONDA
52400-SM4-A01
HONDA
52400-SM4-A02
HONDA
52400-SM4-A03
HONDA
52400-SM4-A04
HONDA
52400-SM5-A01
HONDA
52400SM043
HONDA
52400SM4043
HONDA
RBD100090
ROVER
RBJ001087
ROVER
RBJ001087EVA
ROVER
RGG 102430
ROVER
RGG102430
ROVER
RHH100060
ROVER
* The following item numbers are only for a better identification.